Heavy Duty Mount Kit 12.7mm M8

Heavy Duty Mount Kit 12.7mm M8
Heavy Duty Mount Kit 12.7mm M8
Heavy Duty Mount Kit 12.7mm M8

Click on image to enlarge

Heavy Duty Mount Kit 12.7mm M8Heavy Duty Mount Kit 12.7mm M8Heavy Duty Mount Kit 12.7mm M8

 

Main Features: 12.7mm, 8mm.

Heavy Duty Mount Kit 12.7mm 8mm Bolt Hole

Heavy-Duty Mount Kit, 12.7mm to fit Fox, 5th Element coil, Manitou 11+, RockShox '03-'04 & '08 (inc. Vivid and Monarch), Romic, Avalanch and Giant NRS (phone for Marzocchi) Comprises hollow hard anodised aluminium (under 40mm) or stainless steel (over 40mm) mount pin, polymer eyelet bushing, 2 rubber seals, 2 aluminium spacers. One mount kit fits one end of the shock.

Krzysztof said...
"I got this kit because the stock one was pretty worn on my bike. Now the rear suspension works better then ever. "
Star Rating 5
Clee Cycles said...
"perfect"
Star Rating 5
John said...
"I mounted this kit into my rear damper and it fitted fine. As for its long term performance it is too early to tell but it looks like a reasonable design."
Star Rating 5
Julian Webb said...
"This is well engineered item with tight tolerances. I fitted one to a Whyte t129s with a Rockshox Monarch RD where signifiacant wear had occurred in the OEM hardware over a relatively short period of use. It has taken all the slack out of the rear triangle and is holding up well after a few long off road rides. Fitting it did require the TF tuned bushing removal tool to get the old bushing out, but with that tool it was an easy job."
Star Rating 5
Paul said...
"Fast shipping of a great product, nicely machined and a great replacement/upgrade from the standard Fox bushings. Would highly recommend. "
Star Rating 5
Paul said...
"fast delivery. Nicely made and perfect fit."
Star Rating 5
Chris Wells said...
"Great product, easy to fit. Very prompt service. Will use again."
Star Rating 5
Darren said...
"Very helpful web page for identifying the bush required for the different shocks/bikes.bush fitted perfectly and removed the play which was present in the old bush..have not had any issues since fitting it..time will tell the durability but I'm thinking it will defo outlast the previous bush ..."
Star Rating 5
Konstantinos Michaelides said...
"excellent product, great service"
Star Rating 5
Lee said...
"Great quality item, well engineered. Easy to use website and delivered quick! Recommended!"
Lee said...
"Great quality item, well engineered. Easy to use website and delivered quick! Recommended!"
Star Rating 5
Rule 4 Cycles said...
"Excellent service once again. Product fitted and the bike is back in service :)."
Star Rating 5
Mark said...
"Great quality product fitted perfectly"
Star Rating 5
Andrzej said...
"Excellent quality - they stay stiff after 3 rides - No play at all (the standard bushings in my fox usully survived one ride only!!)."
Star Rating 5
Wayne said...
"Nice snug fit. Been riding with this setup for a little while now and am very pleased so far. Much better than the two-piece spacer set up I had previously which didn't seem to apply even pressure through the whole bush. Thanks!"
Star Rating 5
tomas wrede said...
"I was supriced how nice fitness on these bushings. They are tight and I prefer this instead of bearings that rust and seieze."
Star Rating 5
Richard said...
"Very good service. Far better mounting kit than the original on my Kona Dawg."
Star Rating 5
Paul Boyd said...
"Spot on! Quick delivery and does the job."
Star Rating 5
julian said...
"Excellent quality product and fast delivery"
Star Rating 5
Lorenzo said...
"Item very well done, shipment very slow [TFT comment - All overseas orders ship Royal Mail International Signed for/ Airsure and take an average of 5-10 depending on location]"
Star Rating 5
Mr Moo said...
"A great solution to my rocking shock. Easy to fit and delivered in a day."
Star Rating 5
Paul Burnam said...
"This upgrade kit is good quality with complete with dirt seals, should last a lot longer than the standard fit bush. This should be fitted to all lower rear shock mounts as standard by the cycle industry. "
Star Rating 5
Richard Wills said...
"Exactly as expected. High quality, good value.Happy."
Star Rating 5
Richard Wills said...
"Exactly as expected. High quality, good value.Happy."
Star Rating 5
Mike said...
"Measured up my old/worn shock mounts and got these new ones form TFTuned. Excellent kit and everything I needed was in the kit. Could not have asked for more. Delivery was fast too."
Star Rating 5
Ryan said...
"Good, solid quality product. What else would you expect from the leading suspension supplier in the UK?"
Star Rating 5

People who bought this also bought...

« Back to Heavy Duty Mount Kits

£15.00 inc VAT

TFK8158, TFK819, TFK822, TFK8232, TFK824, TFK8274, TFK8285,TFK8325, TFK835, TFK8355, TFK8374, TFK840, TFK8413, TFK842, TFK8456, TFK850, TFK851,TFK856

Heavy Duty Mount Kit 12.7mm 8mm Bolt Hole

Star Rating 5 26 reviews

UK delivery available from £3.00

365 available Normally despatched within 1 working day

Choose option:
Quantity:

 

You can also...

print this page send to a friend ask a question

 

TF Tuned Servicing

The UK's Leading Independent Mountain Bike Suspension Servicing Centre

TF Tuned Servicing