Page: 1 | 2 | Next
Sort By:
  • display as grid Grid
  • display as list List
View: 12 | 24 | 48 | ALL
Bushing Tool for 12.7mm bushings and Cane Creek 2012+
Bushing Tool for 12.7mm bushings and Cane Creek 2012+
Bushing Tool for 12.7mm bushings and Cane Creek 2012+. This tool will fit all Fox, most RockShox and Cane Creeks from 2012 onwards
£25.00 inc VAT
Cane Creek (2012+) Mount Kit 3/8 Bolt
Cane Creek (2012+) Mount Kit 3/8 Bolt
Cane Creek (2012+) Norglide Mount Kit 3/8" Bolt Hole This kit is specifically for Cane Creek Double Barrel shocks 2012+  and includes a Norglide bushing, heavy-duty axle pin, rubber sealing rings and two spacers. Not sure what size you need? Click Mount Kits to find out
£15.00 inc VAT
Cane Creek Norglide Bushing DB Inline 15.07mm Bag of 4
Cane Creek Norglide Bushing DB Inline 15.07mm Bag of 4
Cane Creek Norglide Bushing DB Inline 15.07mm Bag of 4 Replacement, genuine Cane Creek Norglide bushings for DB Inline shocks.* * note that DB Inlines will also take a standard 12.7mm (Fox/RS) bushing available in the Eyelet Bushing section of the TF webshop   
£14.00 inc VAT
DT Mount Kit M6x22
DT Mount Kit M6x22
DT Mount Kit M6x22
£10.00 inc VAT
 
Heavy Duty Mount Kit 12.7mm M6
Heavy Duty Mount Kit 12.7mm M6
Heavy Duty Mount Kit 12.7mm 6mm Bolt Hole Heavy-Duty Mount Kit, 12.7mm to fit Fox, 5th Element coil, Manitou 11+, RockShox '03-'04 & '08 (inc. Vivid and Monarch), Romic, Avalanch and Giant NRS (phone for Marzocchi) Comprises hollow hard anodised aluminium (under 40mm) or stainless steel (over 40mm) mount pin, polymer eyelet bushing, 2 rubber seals, 2 aluminium spacers. One mount kit fits one end...
£15.00 inc VAT
Heavy-Duty Offset Mount Kit, 12.7mm M6/8x22
Heavy-Duty Offset Mount Kit, 12.7mm M6/8x22
Heavy Duty Offset Mount Kit, 12.7mm Bolt hole offset from centre by 1.5mm Heavy Duty Offset Mount Kit, 12.7mm, M6 x 22 Heavy Duty Offset Mount Kit, 12.7mm, M8 x 22
£20.00 inc VAT
Low Friction Mount Kits 12.7mm M6
Sale
Low Friction Mount Kits 12.7mm M6
Low Friction Mount Kit, 12.7mm to fit Fox, 5th Element coil, Manitou 11+, RockShox '03-'04 & '08+(inc. Vivid and Monarch), Romic, Avalanch and Giant NRS. Comprises hollow aluminium low-friction mount pin, super-low-friction two-piece polymer blue bushing, 2 spacers, 2 slim rubber seals. These mount kits are lower friction and lighter than our heavy-duty mount kits. The low-friction surfaces mean...
was £18.00
now £15.00 inc VAT
Mount Kit, M6x14 Equalizer 2 & 3
Mount Kit, M6x14 Equalizer 2 & 3
Mount Kit for Equalizer 2 & 3 Shocks M6x14
£15.00 inc VAT
 
Norglide Bushing (2012+) 14.7mm
Norglide Bushing (2012+) 14.7mm
Norglide Bushing (2012+) 14.7mm These bushes fit Cane Creek Double Barrel Coil and Air shocks from 2012 onward. 
£3.95 inc VAT
PUSH Low Friction Bushing
PUSH Low Friction Bushing
PUSH Low Friction Bushing If you have an existing Fox Low Friction Mount Kit, these will replace the cream bushings when they wear without the cost of a complete new Mount Kit. 1 kit = 2x Bushes  Buy two kits if you need bushings for both ends of your shock. nb these ones are a gorgeous RED!  
£6.00 inc VAT
Spherical Bearing for DT & Scott Shocks
Spherical Bearing for DT & Scott Shocks
Spherical Bearing for DT & Scott Shocks
£9.95 inc VAT
Bushing Tool for 12mm Bushings
Bushing Tool for 12mm Bushings
Bushing Tool for 12mm Bushings Bushing Tool to make fitting 12mm Bushings into you shock eyelet much easier.
£25.00 inc VAT
 
Cane Creek (2012+) Mount Kit M6
Cane Creek (2012+) Mount Kit M6
Cane Creek (2012+) Norglide Mount Kit 6mm Bolt Hole This kit is specifically for Cane Creek Double Barrel shocks 2012+  and includes a Norglide bushing, heavy-duty axle pin, rubber sealing rings and two spacers. 
£15.00 inc VAT
Heavy Duty Mount Kit 12.7mm M8
Heavy Duty Mount Kit 12.7mm M8
Heavy Duty Mount Kit 12.7mm 8mm Bolt Hole Heavy-Duty Mount Kit, 12.7mm to fit Fox, 5th Element coil, Manitou 11+, RockShox '03-'04 & '08 (inc. Vivid and Monarch), Romic, Avalanch and Giant NRS (phone for Marzocchi) Comprises hollow hard anodised aluminium (under 40mm) or stainless steel (over 40mm) mount pin, polymer eyelet bushing, 2 rubber seals, 2 aluminium spacers. One mount kit fits one end...
£15.00 inc VAT
Heavy-Duty Offset Custom Mount Kit, 12.7mm (M6, M8)
Heavy-Duty Offset Custom Mount Kit, 12.7mm (M6, M8)
Heavy Duty Offset Custom Mount Kit, 12.7mm Bolt hole offset from centre by 1.5mm. Select the bolt size you need 6mm or 8mm and then email us service@tftunedshox.com with your required pin length measurement.   ** Please check your measurements for custom sizes carefully, incorrect custom kits cannot be returned/ refunded**
£25.00 inc VAT
Low Friction Bushing
£6.49 inc VAT
 
Low Friction Mount Kits 12.7mm M8
Sale
Low Friction Mount Kits 12.7mm M8
Low Friction Mount Kit, 12.7mm to fit Fox, 5th Element coil, Manitou 11+, RockShox '03-'04 & '08+(inc. Vivid and Monarch), Romic, Avalanch and Giant NRS. Comprises hollow aluminium low-friction mount pin, super-low-friction two-piece polymer blue bushing, 2 spacers, 2 slim rubber seals. These mount kits are lower friction and lighter than our heavy-duty mount kits. The low-friction surfaces mean...
was £18.00
now £15.00 inc VAT
Norglide Bushing 2012+ 14.7mm Bag of 4
Norglide Bushing 2012+ 14.7mm Bag of 4
Norglide Bushing (2012+), 14.7mm These bushes fit Cane Creek Double Barrel Coil and Air shocks from 2012 onward. 
£14.00 inc VAT
Cane Creek (2012+) Mount Kit M8
Cane Creek (2012+) Mount Kit M8
Cane Creek (2012+) Norglide Mount Kit 8mm Bolt Hole This kit is specifically for Cane Creek Double Barrel shocks 2012+  and includes a Norglide bushing, heavy-duty axle pin, rubber sealing rings and two spacers. 
£15.00 inc VAT
Cane Creek Norglide Bushing Tool
Cane Creek Norglide Bushing Tool
Cane Creek Norglide Bushing Tool Bushing tool specifically designed to assist with the insertion and removal of both 2012+ and up to 2011 Norglide Bushings for Cane Creek shocks (adaptors are included)
£25.00 inc VAT
 
DP Eyelet Bushings, 12.7mm, Bag of 4
DP Eyelet Bushings, 12.7mm, Bag of 4
DP Eyelet Bushings, 12.7mm, Bag of 4 Metal bushings with red inner coating (used by Fox as standard). Not sure what you need? Click Mount Kits to see what's available and how to measure. For Cane Creek shock bushings, see Norglide Bushing or Spherical bearings.  
£10.00 inc VAT
Heavy Duty Mount Kit 12.7mm 3/8"
Heavy Duty Mount Kit 12.7mm 3/8"
Heavy Duty Mount Kit 12.7mm 3/8" Bolt Hole Heavy-Duty Mount Kit, 12.7mm to fit Fox, 5th Element coil, Manitou 11+, RockShox '03-'04 & '08 (inc. Vivid and Monarch), Romic, Avalanch and Giant NRS (phone for Marzocchi) Comprises hollow hard anodised aluminium (under 40mm) or stainless steel (over 40mm) mount pin, polymer eyelet bushing, 2 rubber seals, 2 aluminium spacers. One mount kit fits one...
£15.00 inc VAT
no image available
Sale
Low Friction Mount Kit 12.7mm, M10
Low Friction Mount Kit, 12.7mm to fit Fox, 5th Element coil, Manitou 11+, RockShox '03-'04 & '08+(inc. Vivid and Monarch), Romic, Avalanch and Giant NRS. Comprises hollow aluminium low-friction mount pin, super-low-friction two-piece polymer blue bushing, 2 spacers, 2 slim rubber seals. These mount kits are lower friction and lighter than our heavy-duty mount kits. The low-friction surfaces mean...
was £18.00
now £15.00 inc VAT
 
Page: 1 | 2 | Next