Edge - Enduro Fork - 29"

Intend Edge - Enduro Fork - 29"

Product Description

Enduro Fork
  • Made for the roughest terrain & conditions
  • The one of a kind enduro upside down fork
  • Designed, engineered & tested in Freiburg / Germany
  • Assembled 100% in-house and by hand – One at a time



The Intend Edge suspension fork is where it all started - the latest iteration combines years of development to get to a level of performance we’re proud of.

This one of a kind enduro oriented upside down fork will give you all the confidence you need for approaching your next race or going hunting for KOMs.

Extra sturdy legs and a reinforced crown support you with plenty of stiffness no matter the kind of trail or speed you're going down.

Our DH-ready damping and airspring provides an unmatched subtleness and a natural, predictable feel. In case you wish for more progression: Two bottom caps with alternate progression are within delivery.

Our forks are especially easy to service and special tools are not required. Changing travel is also easily possible, no extra airshaft needed! Just attach the shock pump and turn 360° for +/-1mm stroke.



  • Ride Style: Enduro
  • Travel Range: 150-180mm, adjustable in 1mm steps
  • Wheel Size: 29”
  • Spring Type: Air spring
  • Damping: Closed cartridge, selfbleeding
  • Adjustments: Rebound / Compression / Air spring / Progression
  • Weight: 2130g
  • Colour: Black anodized
  • LowersChampagner coated tubes with pressed on dropouts

Technical data

  • Fork Offset / Rake44mm
  • Steerer Tube Length240mm
  • Stanchions Diameter45mm
  • Axle to Crown180mm (591.5) / 170mm (581.5) /160mm (571.5) ...you get the idea!
  • Steerer TubeTapered 1 1/8" - 1,5" (inner diameter: 23mm)
  • Dropout15mm x 110mm boost
  • Brakemount180mm or 203mm brakemount included


Ride Style


Travel Range

Maximum stroke 180mm / Adjustable in 10mm steps / Theoretical minimum stroke 0mm

Wheel Size

27.5" / 29"

Spring Type

Air spring


Open bath cartridge


Rebound / Compression / Air spring / Progression


2090g (27.5") / 2130g (29")

Brake Mounting

180mm brakemount included


15mm or 20mm x 110mm boost, not changable later

Axle System

Bolt-On thru 15mm axle

Axle Material

Aluminium full billet

Fork Offset / Rake


Axle To Crown

29": 180mm (591.5) / 170mm (581.5) / 160mm (571.5) / 27.5": 180mm (571.5) / 170mm (561.5) / 160mm (551.5) ... You get the idea!

Steerer Tube

Tapered 1 1/8” - 1.5”

Steerer Tube Length


Steerer Tube Material

High strength alloy

Stem Clamp Diameter


Crown Race Seat Diameter


Crown Material

High strength alloy

Stanchions Material

High strength alloy

Stanchions Diameter


Lowers Material

High strength alloy


Black anodized


Royal flush coating / SKF D35 green dust wipers (Without collar) / Main and current sag indicators



Installation guide volume spacer

Intend Air Spring & Damping assembly


Can I ride braided steel hoses on Intend forks?
This hoses are not 100% compatible to USD forks. they are weak and easy to bend. As the hose at a USD fork needs to slide through the upper guides, the use of steel braided hoses causes problems. That is why I recommend normal brake hoses, they work for 100%

Is this fork available with black lower stanchions?
This option is not available.


Are 223mm brake mounts optional?
This option is not available. You can simply use normal brake adapters to make that combination work.

Are Intend forks safe to ride with 223mm rotors?
Yes! You can put any 223mm rotor on Edge, Flash, Bandit and Infinity forks.

Intend Samurai CC, XC and GR are only possible up to 203mm.

Is it possible to change the axle diameter after purchase?
This is not possible any more since beginning of 2022. You can either buy a 20mm dropout or a 15mm dropout.

Can I use a non-boost-hub?
Only on our Infinity forks, you can use 110×20 non-boost hubs, combined with the correct non-boost brake mount.  100x15mm hubs are possible with Boost-spacers.

Is it possible to get stanchion guards for this forks?
This option is not available.

Is it possible to change the travel after purchase?
Yes! You can easily adjust the stroke by adding or removing 10mm spacers.

Does the length of the fork change with adding or removing 10mm spacers?
Yes! By exactly 10mm.

Can I order this fork with a 1 1/8″ straight steerer or different offset ?
This option is not available.

What are the colour options for Intend forks?
You can have any colour as long as it is black anodized. We do not offer any other colours. Only black.

I’ve seen some different colours, do you offer these?
Colour options other than black anodized are not available. The reason is, that anodizing in not-black causes so much troubles, that we cannot guarantee a problem-free, nice looking product trough the whole range. When we sell products, we want to do it perfect, and need to skip all variations which are not “perfect”.


For spare parts, if they are in stock we will send them out the same day if we receive the order before midday (except weekends). If we receive the order after midday, we will do our best to despatch them same day, but it may be the following working day. Orders placed after 3pm on Friday will be despatched on the following Monday. We normally send spare parts by Royal Mail post (see below or our 'Shipping' page for cost/delivery times).

Forks, shocks and large/heavy orders go by courier. UK deliveries are with DPD Local, for overseas customers it's DPD, FedEx or DHL.  In all cases these are fully tracked services and you'll need to sign for the delivery - please provide a suitable address with extra instructions if necessary.


You may return your order unused, within 14 days for a refund if you no longer require it, provided it is returned with its original undamaged packaging and is unused and unmarked. Please note, we do not refund postage unless items were supplied in error or are faulty.

Picking mistakes do sometime happen. If we supply the wrong part or there are parts missing from your order please let us know within 14 days of receipt so that we can correct the mistake. In the case of picking errors we will refund your postage costs on the returned item.

Faulty goods will be replaced with the same item or a suitable equivalent, as appropriate.

TF Tuned cannot be held responsible for the non-receipt of returned goods so please ensure you use a tracked and/or insured service as appropriate to the value of the goods you are returning.

Item: IN8-001

                                                             The one of a kind enduro upside down fork

Write the first review

available Built to order - 3 weeks

£1,755.00 inc VAT

Home Delivery

UK mainland delivery from FREE

People who bought this also bought...

Ohlins Fork Springs
Ohlins Fork Springs
£57.00 inc VAT