REVIVE MAX Spare Parts
BikeYoke Dropper Goo - Suspension Grease - 30ml
BikeYoke Dropper Goo - suspension grease - 30ml
BikeYoke Sanguine - Hydraulic Oil - 250ml
BikeYoke Sanguine - hydraulic oil - 250ml
BikeYoke REVIVE MAX - Dropper Service Kit
BikeYoke REVIVE MAX - Dropper Service Kit
BikeYoke Dropper - O-Ring Kit
BikeYoke REVIVE/ DIVINE - Dropper O-Ring Kit
REVIVE/ MAX/ DIVINE - Premium Dropper Cable Set
New friction-optimized premium cable set for cable-operated seatposts.
REVIVE - Travel Spacer Set (8mm Piston Rod)
Includes:
4x spacers for travel adjustment
Fits:
REVIVE
REVIVE MAX
DIVINE
DIVINE SL / Rascal
Note:The video under the Video tab shows the installation process on a DIVINE. The REVIVE has a slightly different internal structure, but the installation is performed in the same way: Spacers must be clipped onto the shaft between the piston and seal head.When using more than 4 spacers, oil...
Titanium Clamping Hardware
REVIVE - Titanium Clamping Hardware
REVIVE - Quick Reset Lever
Attaches to your Reset Hex Slot instead of the 4mm Allen Key, secured by an O-ring (inlcuded).No more need to grab your 4mm Allen Key.Insert the Quick Reset Lever carefully and completely into the 4mm Allen key slot to not damage the o-ring and to make sure it is secured properly. You can easily engage it with a pull of your finger.Fits:
REVIVE
REVIVE MAX
REVIVE/ MAX/ DIVINE - Cable Clamp
Cable clamp to actuate our REVIVE and DIVINE posts.
Cable Barrel 3.0
Cable barrel for 3.0 dropper seatposts
The cable barrel 3.0 does not need to be clamped and can simply be threaded onto the shifting cable and hooked in.
NOTE: When using the cable barrel, it is necessary that the other end of the cable can be clamped directly to the remote of the seat post
What's included:
1x cable barrel 3.0
Compatible with:
REVIVE 3.0
REVIVE MAX 3.0
BikeYoke Valve Adaptor
Valve adapter.
Allows for easier access to your dropper valve for shock-pumps with short valve heads. Also works with any other Schrader-valved fork/shock/post.
BikeYoke Willy
Don't forget your rubbers!
Creaking is the worst and so it is not wonder, that you can see old inner tubes wrapped and zip-tied to seatposts and seattubes. This helps keep dirt and mud outside your frame, when you riding in muddy conditions. Surely, you´ve noticed your seat-clamp covered in loads of mud after a wet ride.
Willy does not more, but also not less than the DIY old-tube-zip-tie-solution,...