BikeYoke

  • display as grid Grid
  • display as list List

BikeYoke Triggy Alpha ShortBikeYoke Triggy Alpha Short
BikeYoke Triggy Alpha Short
*THIS IS THE LEVER AND CABLE ONLY - PLEASE ORDER CLAMPS SEPERATELY
£65.00 inc VAT
BikeYoke Triggy Alpha LongBikeYoke Triggy Alpha Long
BikeYoke Triggy Alpha Long
*THIS IS THE LEVER AND CABLE ONLY - PLEASE ORDER CLAMPS SEPERATELY
£65.00 inc VAT

Bike Yoke 2 By AdaptorBike Yoke 2 By Adaptor
Bike Yoke 2 By Adaptor
Bike Yoke 2 By Adaptor
£50.00 inc VAT
DeHy for Reverb Stealth A1/A2 Complete KitDeHy for Reverb Stealth A1/A2 Complete Kit
DeHy for Reverb Stealth A1/A2 Complete Kit
Cable conversion system to replace Reverb hydraulic actuation system on Reverb A1 and A2.  This gives a more reliable system which is simpler for home servicing
from £69.00 inc VAT

DeHy for Reverb Stealth B1 Complete KitDeHy for Reverb Stealth B1 Complete Kit
DeHy for Reverb Stealth B1 Complete Kit
Cable conversion system to replace Reverb hydraulic actuation system on latest B1 Reverbs.  This gives a more reliable system which is simpler for home servicing
from £69.00 inc VAT
Splits Clamp
Splits Clamp
Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be...
£10.00 inc VAT

I-Spec EV adapter
I-Spec EV adapter
This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches your Triggy directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapter can be used for either left or right Shimano brake lever and you can get them as...
£15.00 inc VAT
I-Spec II Adaptor
£20.00 inc VAT

I-Spec B AdaptorI-Spec B Adaptor
I-Spec B Adaptor
This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches your Triggy directly to a Shimano I-Spec B brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers with Shimano brakes.
£20.00 inc VAT
BikeYoke Revive Service KitBikeYoke Revive Service Kit
BikeYoke Revive Service Kit
Revive 100hr service for 30.9/31.6 seatposts
£16.50 inc VAT

BikeYoke SagmaBikeYoke Sagma
New
BikeYoke Sagma
BikeYoke Sagma
£105.00 inc VAT
SqueezySqueezy
New
Squeezy
We never just want to make something, that´s already there. We want to make something different, something better.Featuring a classy and costly CNC-Finish and a wonderful Titanium bolt, Squeezy is not just light @ 8g (35mm) and 9g (38mm).Unlike other seat clamps, Sqeezy has a collar-less design.Collars are basically just a installation aid, to prevent the clamp from sliding down the seattube,...
£26.00 inc VAT

Titanium Seatclamp Bolts
New
Titanium Seatclamp Bolts
REVIVE - Titanium Clamping Hardware
£22.00 inc VAT
WillyWilly
New
Willy
Don't forget your rubbers! Creaking is the worst and so it is not wonder, that you can see old inner tubes wrapped and zip-tied to seatposts and seattubes. This helps keep dirt and mud outside your frame, when you riding in muddy conditions. Surely, you´ve noticed your seat-clamp covered in loads of mud after a wet ride. Willy does not more, but also not less than the DIY old-tube-zip-tie-solution,...
£6.50 inc VAT