Fox Ramp Control Upgrade Cartridge
Product Description
Ramp Control Upgrade Cartridge for Fox 32, 34, 36, 38 and 40
- Adds speed-sensitive ending-stroke control and bottom-out force adjustability to compatible forks.
- Just 55 g! Lighter than most air-spring assemblies with more than two tokens.
- Isolate and tune bottom-out with minimal changes to initial and mid-stroke.
- Bring your tuning to the trail and out of the workshop!
- Easy installation requires little time and few tools - no lower-leg removal required (except for Fox 36 Version E)
Fox 32 |
|
Fox Ramp Control Cartridge Model C ...will fit 2016 and newer Fox 32 Float forks with the FIT 4 and Grip dampers. Recommended for 100-130mm 26”, 27.5” and 29' forks. FURTHER COMPATIBILITY INFO:
|
|
Fox 34 |
|
Fox Ramp Control ...will fit 2016 and newer Fox 34 Float forks with the FIT 4 and Grip dampers. Recommended for 140-160mm 29”, 27.5+, and 27.5” forks. ...will fit 2020 Marzocchi Z2. Recommended for 140-160mm 29”, 27.5+, and 27.5” forks. |
Fox Ramp Control Cartridge ...will fit 2016 and newer Fox 34 Float forks with the FIT 4 and Grip dampers. Recommended for 110-130mm 29”, 27.5+, and 27.5” forks. FURTHER COMPATIBILITY INFO:
|
Fox 36 |
|
Fox Ramp Control Cartridge Model D (2015-2017) This new model goes beyond our previous offerings and includes parts to convert the stock air-spring into an independent positive and negative chamber arrangement. Once installed, you can now vary the pressures in your two chambers; increasing your negative spring rate to improve small bump sensitivity (a common complaint with the stock spring). This, in addition to the control you have over bottom-out and ending-stroke performance, gives you a radically more sophisticated air-spring that’s incredibly straightforward to tune and adjust! ...will fit 2015-2017 Fox 36 Float forks with the FIT 4, RC2, and Grip dampers. Recommended for 140-180mm 29”, 27.5+, and 27.5” forks. |
Fox Ramp Control Cartridge Model F (2018-2020) Version F is a cartridge-only kit suitable for Fox 36 forks of all travel and wheelsize options. A revised air-spring design in the 2018 and later Fox 36 makes the Fulfill™ spring conversion included in Ramp Control Upgrade Version D incompatible. ...will fit 2018-2020 Fox 36 Float forks with the FIT 4, RC2, and Grip dampers. Recommended for 140-180mm 29”, 27.5+, and 27.5” forks.
|
Fox 38 |
|
Fox Ramp Control Cartridge Model G ...will fit 2021 and newer Fox 38 Factory and Performance forks. Total tuning range (strictly in terms of ending-stroke support) is roughly equivalent to 1-4 volume spacers. Thus fully open, the Ramp Control cartridge reduces spring volume similar to one volume spacer. In its strongest setting, and under a high-speed compression, the ending-stroke support will be similar to a spring with its volume reduced by four standard spacers. |
|
Fox 40 |
|
Fox Ramp Control Cartridge Model E ...will fit 2016 and newer Fox 40 Float Factory and Performance Elite forks. |
Delivery
For spare parts, if they are in stock we will send them out the same day if we receive the order before midday (except weekends). If we receive the order after midday, we will do our best to despatch them same day, but it may be the following working day. Orders placed after 3pm on Friday will be despatched on the following Monday. We normally send spare parts by Royal Mail post (see below or our 'Shipping' page for cost/delivery times).Forks, shocks and large/heavy orders including bike frames go by courier. UK deliveries are with DPD Local, for overseas customers it's FedEx or DHL. In all cases these are fully tracked services and you'll need to sign for the delivery - please provide a suitable address with extra instructions if necessary.
Returns
You may return your order unused, within 14 days for a refund if you no longer require it, provided it is returned with its original undamaged packaging and is unused and unmarked. Please note, we do not refund postage unless items were supplied in error or are faulty.Picking mistakes do sometime happen. If we supply the wrong part or there are parts missing from your order please let us know within 14 days of receipt so that we can correct the mistake. In the case of picking errors we will refund your postage costs on the returned item.
Faulty goods will be replaced with the same item or a suitable equivalent, as appropriate.
TF Tuned cannot be held responsible for the non-receipt of returned goods so please ensure you use a tracked and/or insured service as appropriate to the value of the goods you are returning.
Customer Reviews




"Nice! Ruth @TFT"



"Thanks for review Iain, good to hear we could help! Ruth @TFT"
Home Delivery
UK mainland delivery from £6.00