Search results for... shock mount Whyte JW2

Other pages matching your search...

Basic Air Can Maintenance

Tools are available here Oils and Greases are available here Seals and consumables are available here 1: Remove the mounts from the body end of the shock. This will allow the air can to slide over them later on. 2: Secure the air-can end of the shock in a set of soft-jaws, and let the air out 3: Unscrew the air can from its threads. 4: Carefully...

Fitting Your Forks

Tools Needed: Various sizes of allen key, bike stand (optional) If you have one, secure the bike in its stand. Start by sliding the fork up into the headtube. Slide any spacers you had fitted onto the steerer tube. Make sure the stem bolts are loose, then slide the stem down onto the steerer tube. Do up the top-cap bolt by hand (do not tighten it yet!)....

Removing Your Shock

Tools needed: Bike stand (optional); Allen keys (various sizes) Removing the shock: If you have one, secure the bike in its stand. You may find it easier to remove the shock if you take off any preload on the spring by turning the spring adjuster anti-clockwise until it is putting no pressure on the spring. Use an allen key to loosen the lower bolt...